Andy Makes it Better.

Wishing everyone who stumbles across this little blog a perfect Thanksgiving. This year I am thankful for so many things,,,, my boy, my wife, my friends, my dog, my health.... and I am super thankful that I discovered Elise's (my wife) college television and it still works!!! Indie rock stickers and all. So now... no matter what I am doing in the shop... Andy will always make it better.

Happy Thanksgiving!!!!!!!!

Just for kicks, here is the Amazon.com tool deal of the day. I don't really need a fourth router but I am tempted to buy this based solely on the deal. But alas, I am showing restraint.

Milwaukee 1.75-Horsepower Plunge Base and BodyGrip Fixed Base Router

Normally $400, now $118. Plus it has "BodyGrip." Don't know what that is but it sounds awesome!

Made a fire to day with the 5 tons (exaggerated,,, only 4 tons) of cut offs that have been accumulating in a corner for 6 months. Had to roast a marshmallow or 2. Yeah,,, that's a gigantic frying pan...

Spread Out!

Life in the shop is humming, even in the shadow of holidays, family, and sick boys. At the close of the Stanley Table project the shop is going to get upgrades. Some big upgrades. Some little upgrades. (can't say upgrade without thinking about that horrific Beyonce commercial,,, scarred for life.)

First, the shop will be experiencing a 250 square ft expansion. Walls are coming down, others are getting painted. Floors are getting a new surface and a complete rearrange of tools, equipment, power, and dust collection is in order. New cabinets and work surfaces along with a new bench. Big project... but I am excited. Should be fun to document.

Second:

For many years I have been on the hunt for a bigger, more powerful band saw for re-sawing stock/ veneers/ laminating, so finally the shop will be getting a new one. I don't want the massive 24" Andre the Giant saw. 18" is where I want to live. I've been looking at used saws for a while but have finally narrowed it down to 3 new models in my price range. Decided on new because right now I just don't want to fuss with some of the baggage that accompanies older equipment plus I want to know I can order parts, get a warranty, etc... Help me out here if you are a woodworker and have had any experience with these models. I based a lot of my research on Fine Woodworking reviews and input from local natives. Here are my 3 choices: All have similar basics but there are across the board differences.

General 18"

- most expensive of the 3

- most horse power (3)

- no blade drift adjustment

- still totally badass and looks the coolest.

Rikon 18" 10-345

- middle on cost

- Top Tool Popular WoodWorking

Fine Woodworking Best Value for 18" band saws

- When it was reviewed for Fine Woodworking the guy loved it. I believe it would have gotten "Best Overall" had it had a bigger motor. At the time it was 2hp but Rikon has since upgraded to 2.5 HP for more re-saw power. A definite plus. This is the saw I am leaning towards.

Grizzly 513x 17"

- lowest cost

- reviewed well in Fine Woodworking

- lowest Horsepower (2hp)

- No blade drift adjustment

- Owned a few Grizzly machines and have been somewhat pleased however a few were machined poorly.

Any feedback would be appreciated.

Out.

O.G.

What's better than the original? Not much.

well,,, there is Phil Collins' version of "You Can't Hurry Love" Maybe the best cover in the history of music??? not joking.

Work continues on the Stanley table. From the onset, The Stanley's wanted a simple, clean, modern table with a little rustic character. Modern Farm table (yeah,,, I said that last post). But simple, clean, modern is anything but simple. If it's simple... it has to be perfect because you'll notice if it isn't.

So... this leads me to Phil

I've been agonizing over the legs for the last few days. The original drawings (refer to 1st Stanley Table post) show a very simple design. Maybe too simple. While trying to figure out the leg placement, I angled them out very slightly. It looked good. Gave the legs just enough umpf?

but not too much. We'll see. The original is still talking to me. Thanks Sussudio.

Legs aside. Here are some shots of the base. Since there will be a horizontal board in the middle of the legs, I decided to have the rails on the flat vs a more traditional style on edge. Half lap joints. The ends are awaiting approval to stay square or get a bevel. You can definitely see some Mission in it. Which... Is fine. Mission is simple but I want to stay away from any particular "style." So, keeping the ends square would probably look less mission. Even so,,, this will be upside down so you will only ever see 6" of the boards. OK... Photos. I threw some fancy edge blur in there for you all. enjoy.

8/4" leg stock. (8/4 is 2" in lumber yard talk. these were milled to 1 3/4")

Laying out the base rails.

Finishing up the half laps. Cut most of the waste out using the dado.

Fit almost there. About 1/32" proud.

Everybody together. Nice fits. I am going to peg these with some white oak dowels for a little added strength.

The now mandatory Milo shot. Was taking some shots of different leg orientations on a mocked up base. When I was downloading theses I noticed my boy relieving himself on his water table. My son for sure!!!

Elbow Grease.

Work on the Stanley table is rolling. Glued up the table top this week. I have done a few larger tables in the past and always used biscuits to join the individual boards for a little added strength and alignment. I decided to try the Domino in lieu of the biscuit joiner for this top.

2 reasons:

First- the top is 1 1/8" quarter-sawn white oak. Super heavy. The Domino adds a little more strength. Maybe its overkill you say??? Well.... maybe. But this table is going to be sturdy. I'm thinking of it as the modern farm table so I want the Stanley's kids, kids, kids to eat at it. (if we still even have to eat in the future. Alex P. Keaton could operate a time machine on banana peels)

Second: just wanted to use the Domino. It worked well. Instantly aligned and no slipping like biscuits tend to do. Also, individual boards remained virtually flush with few exceptions. I was pleased.

Getting a large top flat is always a good time. Lot's of elbow grease. My friend Scott knows all about it.... well... he will. Love you Scotty!

Here are some progress shots: Have I said how good white oak smells? Still loving it.

Trying to get the layout right. A few of the boards had some sapwood on the edges. I wanted to use it to break up the monotony of a large table top but it had to flow. Wound up with two symmetrical "stripes." Super cool. (I say super a ton).

SQUEEZE OUT!!!!!

Filling little cracks/checks/wormholes with epoxy colored with wood dust.

Knocking down any higher spots with the belt sander

Scraping the entire surface with a... well... scraper. I also draw lines with chalk so I know where I have been. I also periodically shoot a straight edge across to make sure everything is getting flat. This part is labor intensive. Would probably be easier with a Stanley #81... but alas... I haven't one.... my thumbs are sore to say the least. Still have to do the underside... ugh...

Top scraped and cut to size. I like the sapwood... a lot. And last but not least........

My glue scraper... isn't that a Fugazi song? wait... Glue Man... my bad.

Sing out!

2 parts:

First part: I recently read an article about cleaning saw blades. Table saw blades are no joke... financially speaking.... especially the good stuff (Forrest Blades, my favorites). Forrest has a great program for sending blades in for re-sharpening,,,, but,,,, to get a lot more life out of the blade between sharpenings, and limit the times you must actually send in your blades, cleaning works magic. Wood resins build up on the teeth and get hardened from the extreme friction and forces occurring during use. I have always read oven cleaner or kerosene were the ways to go to remove it, but I have never been a fan of their toxicity and the corrosive properties in oven cleaner. As a few people already know, I spent some great years in the cycling industry. I decided to try some Simple Green Bike Degreaser I had on hand. Unbelievable! Went from feeling dull and sluggish to cutting like a laser in 15 minutes. As David Marks says, "The most dangerous tool in the shop is a dull one." Or in this case, dirty. Check out the results.

One of 2 blades I cleaned before cleaning. They both looked like this.

After Cleaning. Damn!

Second part: Why is this important? My son Milo hangs out with me in the shop quite often (he actually plays outside the shop door or works on his own wood projects. *Power tools are never operated when he is around and all sharp instruments are rigorously kept beyond his little fingers so don't get jumpy).OK Gonna get sappy. There is nothing better than hearing his sweet little voice singing Cat Stevens when I am working. NOTHING. Hopefully he'll pick some things up (woodworking things... not my "sometimes" bad language) in the process. OK, why is it (what?) important. Non-toxic degreaser. Sustainable wood products. Recycling. creating as little waste as possible. I definitely think of him. What is his future? Am I harming him or what will be around him with what I am doing? It would kill me if I was. So finding a new product that works extremely well, is safe, and helps make this smile made me happy.

WHAT UP SIMPLE GREEN!